copper rod breakdown machine with coninuous annealer

This machine works to draw Φ8mm copper rod into copper wire ranging from Φ1.2-4.0mm and further softens the wire by direct annealing, and then the wire is taken up into Φ630 or Φ500 bobbin by dual spooler or coiler by Φ800 coiler. The product conforms to the the requirements of the Chinese National Standard GB3953.

1. Main Technical Data

1.1. Input diameter:                   Φ8mm cold-rolled copper rod

1.2. Output diameter:                  Φ1.2~4.0mm

1.3. No. of drawing dies:               13

1.4. Diameter of capstan:               Φ450mm

1.5. Max. delivery speed:               25m/sec.

1.6. Take-up motor                    2x22kw (DC)

1.7. Mode of annealing                 DC annealing

1.8. Main motor                       280kw (DC)

1.9. Motor of final capstan              90kw (DC)

1.10. Coiling motor                    22kw

1.11. Max. annealing power             360kva

1. Composition

2.1. Pay-off stand                      1 set

2.2. Drawing machine proper             1 set

2.3. Horizontal annealer                 1 set

2.4. Tensioner for accumulator            1 set

2.5. Dual spooler forΦ630 orΦ500 bobbin   1 set

2.6. Φ650 coiler                       1 set

2.7. Pointing & threading unit            1 set

2.8. Electrical control system             1 set

2.9. Steam generator                    1 set

2.10. Gearbox lubrication system          1 set